Stainless Steel Shim SUS301 | Spring Shim | 301 stainless steel | UNS S30100 | 1.4310 | X10CrNi18-8 | aisi 301



SS301 With high quality spring steel has a Rockwell hardness range of Hrc 48/51. SUS 301 is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel. The high strengths of this grade of steel in the six available conditions or tempers, its resistance to atmosphere corrosion and its bright surface.

Share Product:


Stainless Steel Shim 301 (or known as Spring Shim)

Specifications and Use :

Precision Brand Blue Tempered Spring Steel Shim is a C1095 high carbon, hardened and tempered product to meet the most exacting requirements. This high-quality spring steel has a Rockwell hardness range of C 48/51. This material is preferred by tool and die makers for low templates and shim applications where toughness and low fatigue values are required. The blue surface is ideal for scribing layouts. Recommended for various types of coiled and flat mechanical springs, such as those used in tuning devices, electrical assemblies, steel tapes and rules.Hardened and tempered to the most exacting requirements for your critical applications. Pre-tempered spring steel can withstand mild forming, but when yours finished piece is a blanked part, it is usually the only economical raw material to consider. Its uses include doctor blades, all types of flat springs, motor springs, valves, steel tapes, reeds and numerous other applications.

Min Thickness from 0.0127mm to 2mm.TYPICAL ANALYSIS: C .90/1.04 Mn .30/.50 P .025 max. S .050 max Si.15/.30TYPICAL

HARDNESS : Rockwell C 48-51

TYPICAL APPLICATIONS : Ignition vibrator springs, springs for timing devices, springs for Electrical & Electronic applications, tapes, & rules

FINISH : Deep blue, polished

AVAILABLE FORMS : Stock size sheets and coils. Material may also be Slit, Sheared, Cut to your specifications.

Catalogue Download